GRANULATED SLAG BALL (GS Ball)

Granulated Slag Ball (GS Ball)

Granulated Slag Ball (GS Ball) is a blasting abrasive made from Steel Slag Atomizing Process. It is a substitute for sand and copper Slag, which are generally used for blasting jobs. It is better in performance as compared to Copper Slag in terms of profile and roughness.

GS Ball can be reused for three times whereas copper slag cannot be reused. It is an eco-friendly blasting abrasive since it emits very less amount of dust during the process of blasting.

TECHNICAL DATA SHEET


CHEMICAL PARAMETER:

S. No Parameters Value
1 SiO2 12.5%
2 Al2O3 5%
3 Fe2O3 46.50%
4 MgO 7%
5 CaO 25%
6 TiO2 0.5%
7 P 0.4%


PHYSICAL PARAMETER:

S. No Parameters Value
1 Specific Gravity 3.35 – 3.80
2 Hardness 6.5 Mohs
3 Bulk Density (Loose) 2.215 kg/lit
4 Illumination Glassy Surface
5 Shape Spherical
6 Moisture 0.001%
7 Free Silica Nil
8 Available Sizes

> 0.6 mm
0.6 to 1 mm
0.6 to 2 mm
1 to 2 mm
1 to 2.5 mm
0.6 to 5 mm
1 to 5 mm
2 to 5 mm

Advantages:

Sand Blasting: Abrasive blasting at high pressure is commonly used against an object to smoothen out a rough surface. Sand blasting describes the action of launching very fine components of the material at high-speed, to clean up or etch a surface. Shot blasting is used for blasting metal. Mobile shot blasting machines are most used for blasting drums, floors or walls.

Sandblasting is typically used for two different applications.

  • Over size and Undersize fractions are Max. 10% and Max. 5% respectively
  • Low wear of Equipment which saves equipment maintenance cost
  • Negligible dust during usage
  • Turbidity tested, negligible dust level in water
  • High Strength, High Durability, Low breakage which saves production cost
  • Non - reactive to water, no flash rust found after 4weeks submerged in water

Reference Standards:

  • This product has been tested on new steel (Grade A) in accordance with ISO 8502 - 3, Assessment of dust on steel surfaces prepared for painting (pressure sensitive tape method) Tests for the assessment of surface cleanliness and achieved level less than dust quantity Rating 2
  • This product meets the requirement of SSPC Abrasive Standard No-1 Type -2 Class-A
  • This product meets the turbidity test as per API sets limit of <250FTU
PARTICAL
REF. SIZE *		 PARTICAL
SIZE (MM)		 EST. SURFACE
PROFILE (MICRONS)		 SURFACE
FINISH		 APPLICATIONS
ABR 060 0.1 - 0.6 40 - 65 SA 3 PETROCHEMICAL, OIL & GAS
ABR 100 0.6 - 1.0 55 -105 SA 2.5 OIL & GAS, SHIP BUILDING & SHIP REPAIR
ABR 200 1.0 - 2.0 80 - 125 SA 2.5

Available Packing:

We work hard to protect our users from unauthorized access to or unauthorized alteration, disclosure, or destruction of information we hold. In particular:

  • In 25 kg Packing
  • In Jumbo Bag